Rack Mounted Keyboard & Mouse Shelf

thingiverse

This was designed for the KBD75 mechanical keyboard by kbdfans. Hinge Mount.stl - You'll need two of these. They're symmetric, so no need to mirror them. Right Shelf Half.stl and Left Shelf Half.stl - These are 238m wide, so you'll need a printer large enough Hinge Cap.stl - You'll need two of these. They're symmetric, so no need to mirror them. Latch Pin.stl - You'll need two of these, but you'll need to mirror one. Latch.stl - You'll need two of these, but you'll need to mirror one. Mouse Bracket.stl - You only need one of these. The two halves of the shelf are held together by three socket cap screws. I used 1/4" screws and nuts, but 6mm should work. The two Latch Pins are held into the sides of the shelf by M5 button head screws. The Hinge Caps are held into the back of the shelf by M5 socket cap screws. The Mouse Bracket is mounted to the back of the shelf by M5 screws. The keyboard is mounted to the case using 3/8" long 3-48 socket cap screws. I used these because it's what I had available. I haven't looked to see what the metric alternative is.