Ram Skull Mask

prusaprinters

<p>This was featured on Thingiverse.</p> <p>*** I made a wall hanger for it here &gt;&gt;&gt; <a href="https://www.prusaprinters.org/prints/2666-ram-skull-mask-wall-hanger">https://www.prusaprinters.org/prints/2666-ram-skull-mask-wall-hanger</a></p> <p>This is a remix of MakerBot's awesome Ram Skull <a href="https://www.thingiverse.com/thing:473590">https://www.thingiverse.com/thing:473590</a></p> <p>This thing is MASSIVE!! I used 5 KG of filament (2 white for the skull and 3 tan for the horns).</p> <p>I made this for my daughter so it may not fit a large adult. It just barely fits me. Because of the weight, I don't recommend this for small children.</p> <p>I moved the eyes to the front for obvious reasons. Now it looks like a hybrid of human and ram skull.</p> <p>I glued memory foam to the top (for the top of your head) and glued felt over it and on the rest of the inside for comfort. (see 4th picture)</p> <h3>Print instructions</h3><p>Printer Brand: Prusa<br/> Printer: i3 MK2.5<br/> Supports: Yes<br/> Resolution: 0.35<br/> Infill: 5%</p> <p>Notes:<br/> If you print at higher resolution, it will take forever to print. It looks very good at 0.35. The longest part to print was 30 hours and there are 16 parts.</p> <p>I did the infill at 5% to keep it as light as possible. It comes out perfectly.</p> <p>Do not do less than 4 perimeters or the pin holes will break when assembling it.</p>