range

cults3d

Fan to be made, very useful by high temperatures. It is necessary to print : the middle sticks (x10) the finishing rods (x2) the tracing guide for the fabric You'll need a 50cm x 30cm piece of thin fabric or paper (curtain sheer for my part), glue and a rivet/or string. Then position the fabric on a piece of cardboard and on a flat surface. Place the guide close to the edge of the cardboard and about in the middle (on the side of the 50cm), fix it with a pin on the axis of rotation (see diagrams in the folder). Trace the markings then rotate the guide to the traced markings, trace the markings again, repeat the operation a total of 12 times. Cut the fabric then glued the rods with the help of the markings. Fan to make, very useful in high temperatures. You must print: the middle sticks (x10) the finishing strips (x2) the tracing guide for the fabrics You will need a 50cm x 30cm piece of thin fabric or paper (curtain sheer for me), glue and a rivet/or string. Then position the fabric on a piece of cardboard and on a flat surface. Place the guide close to the edge of the cardboard and roughly in the middle (on the 50 cm side), fix it with a thumbtack on the axis of rotation (see diagrams in the file). Trace the markers then rotate the guide to the markers drawn, trace the markers again, repeat the operation a total of 12 times. Cut out the fabric then glue the strips using the markings.