Raspberry Pi 3 and camera mount for Hypercube using motionEyes

thingiverse

I wanted to mount a camera on my Hypercube so I can watch the progress of prints remotely, so I remixed https://www.thingiverse.com/thing:2724200 Raspberry Pi 3 Case for 2020 extrusions by Greg191134 and https://www.thingiverse.com/thing:1718628 Adjustable/Rotating Mount for Raspberry Pi Camera V2 by theodroid to make a Raspberry Pi3 case to mount on a 3030 extrusion with an integrated mount for the Raspberry Pi camera. Using the motionEye image I downloaded here: https://github.com/ccrisan/motioneyeos/releases/tag/nightly-dev , I had an IP camera set up and working in 15 minutes. I modified the camera front cover with a square opening for the lens, as the original one ha a round opening and a tab at the top to support the camera circuit board properly in the case.. I added an extension to the top case mount with tabs to attach the camera arm. I am poweringthe Pi with a 12 volt to 5 volt converter with a microUSB plug from the power supply on my Hypercube. https://www.amazon.com/gp/product/B07H7X37T6/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 There are also converters that can power the Pi from POE, either with a hat on the Pi or a breakout box the converts the POE to 5 volts to the Pi. https://www.amazon.com/AuviPal-Compliant-Splitter-Raspberry-Chromecast/dp/B07TYBQB3B/ref=pd_rhf_dp_p_img_1?_encoding=UTF8&psc=1&refRID=90KNZC5XVJJPJSFE6CJ4 https://www.amazon.com/gp/product/B07ZFZNMTJ/ref=crt_ewc_title_dp_4?ie=UTF8&psc=1&smid=A2SZCFXJT89WME