Raspberry Pi 3 - Case for 3.5" Touchscreen (XPT2046) - Optional Fan

prusaprinters

<p>I made this case because I could not find one that fits my needs. I use this setup for a beer fermentation controller, for this reason, the current version only has an opening for the micro USB connector and another opening for the 1-Wire Cable, I don't need the other connectors. This case also has a spot for a fan to make sure the raspberry and the screen are properly cooled. There is also some space below the Raspberry for cooling and wires.</p><p>The raspberry slides in from the left or right together with the display in one piece. I have not tested this with the Raspberry Pi 1/2.</p><p>I will be uploading additional versions with more openings for other connectors, but I cannot yet give an ETA. Included will be a version without fan, basically a different left cover.</p><p>Hardware used in this project:</p><ul><li>3.5" XPT2046 Screen (<a href="https://www.aliexpress.com/wholesale?catId=0&amp;initiative_id=SB_20220410071821&amp;origin=y&amp;SearchText=3.5%22+XPT2046+Screen">https://www.aliexpress.com/wholesale?catId=0&amp;initiative_id=SB_20220410071821&amp;origin=y&amp;SearchText=3.5%22+XPT2046+Screen</a>)</li><li>Raspberry Pi 3</li><li>5 Volt 30x30x7mm (<a href="https://www.aliexpress.com/item/1Pcs-5V-0-2A-Cooling-Cooler-Fan-For-Raspberry-Pi-Model-B-Raspberry-Pi-2-3/32814276219.html?spm=a2g0s.9042311.0.0.TtumLW">https://www.aliexpress.com/item/1Pcs-5V-0-2A-Cooling-Cooler-Fan-For-Raspberry-Pi-Model-B-Raspberry-Pi-2-3/32814276219.html?spm=a2g0s.9042311.0.0.TtumLW</a>)</li></ul><p>Changes:<br>28.12.2017 - Uploaded more images / renderings<br>28.12.2017 - Uploaded right cover without openings for plugs</p><h3>Print instructions</h3><p>Rafts: No</p><p>Supports: No</p><p>Resolution: 0.15mm layer @ 80mm/s</p><p>Infill: 50%</p>