Raspberry Pi 3 case for Ender-3 S1 Pro and Waveshare 5" touchscreen

thingiverse

Hi, I needed a case for a Raspberry Pi 3 and a Wondershare 5" DSI touch display to get Klipper on my Ender 3 S1 Pro. I found SailllingStone's design but it was made for the Rpi4 (different layout) and had some issues. Here are the improvements from SailingStone's design: - Replaces threaded holes by normal holes with tight tolerances - Bigger holes for the fan (fits with screws normally included with computer fans) - Adjusted the holes position for the screen screws - Added an opening for the Micro-USB power plug - Bevels around the screen - Fixed the Raspberry Pi logo being upside down You'll need 8 M2.5x8 screws to mount the cover. Feel free to comment and post it if you made it! UPDATE 08/01/23: I added a modified version of the back cover for portrait mount. To change the display's orientation, you'll need to edit 2 files on the Rpi: Change the display orientation: - Connect to your Rpi via SSH. - Type: sudo nano /boot/config.txt - At the end of the file, add: display_lcd_rotate=3 - Press Ctrl+X to exit nano. Press Y and then Enter to save the file Change the touchscreen orientation: - Type: sudo nano /usr/share/X11/xorg.conf.d/40-libinput.conf - At the end of the touchscreen section, just after “Driver ”libinput"", add: Option "TransformationMatrix" "0 -1 1 1 0 0 0 0 1" - Press Ctrl+X to exit nano. Press Y and then Enter to save the file. - Type: reboot