raspberry Pi 3 vesa mount converted to imperial hardware

thingiverse

This is a modified version of a popular pi case. required hardware 4x 2-56x3/4" screws 4x 2-56 nuts 3/16" width 4x 4-40x3/8" screws 4x 4-40 nuts 3/16" width print with supports on build plate only. This is to support the cavities for the holes that retain the nuts etc. The flat top of the case lid should be on the build plate. Likewise the flat bottom of the bottom half of the case should be on the build plate. Also included is the carbide create file for cutting out the vesa mount extender via CNC. The extender should be cut out of .25" material, and the retaining nut holes in this piece should be 3.2mm deep. This part uses 8x m4x12 screws and 4x M4 nuts 7mm width Revision History: version 1.0: retaining nuts worked. The .75" 2-56 screws didn't quite reach. Removing support from the top portion holes was annoying. (Current)Version 1.1: printing now will see if it is good to go shortly. Removed areas where support gets trapped, changed 2-56x3/4" cutout portion to make the screws fit better.