Raspberry Pi 3A+ Remix for Macpi Pro Tiny V2.1

prusaprinters

<p>Original Thing (you will need parts from it): <a href="https://www.thingiverse.com/thing:2746430">https://www.thingiverse.com/thing:2746430</a></p><p> </p><p>I noticed that a Raspberry Pi 3A+ fit nearly perfectly in the Macpi Pro Tiny V2.1 so I designed some parts to properly fit one in.</p><p>This would probably compatible with all previous pies in this form factor as well.</p><p>However, the usb port is inaccessible but there is enough space for a Logitech wireless receiver or something similar for mouse and keyboard.</p><p>Optionally, you can add a small power led above the fan as the original leds are blocked (guide I used: <a href="https://howchoo.com/g/ytzjyzy4m2e/build-a-simple-raspberry-pi-led-power-status-indicator">https://howchoo.com/g/ytzjyzy4m2e/build-a-simple-raspberry-pi-led-power-status-indicator</a>). There is also enough space to add a small dc boost converter to power a 12v fan.</p><p>I designed this so you would only need to replace 3 parts and add 1 additional part if you printed the original one.</p><p>You also need a M3*10 Hex screw because the original screw would interfere with the micro-SD card.</p><h3>Print Settings</h3><p><strong>Printer Brand:</strong></p><p>Creality</p><p> </p><p><strong>Printer: </strong></p><p>Ender 5</p><p><strong>Rafts:</strong></p><p> </p><p>No</p><p> </p><p><strong>Supports: </strong></p><p>No</p><p><strong>Resolution:</strong></p><p> </p><p>0.2</p><p> </p><p><strong>Infill: </strong></p><p>20%</p><p><br/><strong>Filament:</strong><br/><br/>Various PLA Various <br/> </p><p><strong>Notes: </strong></p><p>Be warned that I had to do a lot of sanding to get the shell to fit over the frame.</p><p> </p><p> </p><p> </p><p> </p><p>Category: Computer</p>