Raspberry Pi 4 case with 100mm VESA mount
thingiverse
***Big thanks to plammers for the original design!!!*** <h2>***Here you will find two remixes in one: ***</h2> 1. I did a quick and dirty remix of the bottom to have a ***VESA 100x100 mm mount***. I does slice with FlashPrint (Flashforge software) - I had problems slicing it with ideamaker. Try and report back if you find other slicers that work. 2. Also I did a Top that supports the fan shim of pimoroni. You should be able to use the added button to press the tactile switch on the shim inside. https://shop.pimoroni.com/products/fan-shim Make sure to not short the shim to the wifi module metal shield! I but on some extra nuts under the shim screw to act as spacer! Also I tested with the original raspberry foundation HDMI cables. This case works nicely with these cables. I included the original Top for convenience, should you not need my new Top Design. Have fun!
With this file you will be able to print Raspberry Pi 4 case with 100mm VESA mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Raspberry Pi 4 case with 100mm VESA mount.