Raspberry Pi 4 Case with Micro SD Card Slots

prusaprinters

<p>This is a snap-together case for the Raspberry Pi 4 with storage slots for three additional micro SD cards. This was requested by members of the <a href="https://www.guildofmakers.org/">Guild of Makers</a>, and made by a member, and so it carries the guild logo.</p> <p>The RPi is attached to the lower case with M2.5 screws, which should self-tap into the screw pillars.The upper case can then snaps on top. I provided plenty of room in this case for a fan (like the fan shim).</p> <p>SD cards can be slid into the slots on the side and secured by friction fit by a small bump. They are easily extracted with a fingernail.</p> <p>Supports are required, but should not affect the outside appearance anywhere that matters.</p> <p>Suggestions for improvements are always welcome, and an F360 file is available if anyone would like to edit it themselves.</p> <h3>Print instructions</h3><p>Unassociated tags: pi 4, raspberry pi, raspberry pi 4, sd card, sd card case</p> <h3>Licence: Creative Commons - Attribution - Share Alike Category: Electronics Print Settings</h3> <p><strong>Printer Brand:</strong> Prusa</p> <p><strong>Printer:</strong> I3 MK3S</p> <p><strong>Rafts:</strong> Doesn't Matter</p> <p><strong>Supports:</strong> Yes</p> <p><strong>Resolution:</strong> .2mm</p> <p><strong>Infill:</strong> 20%</p> <p><strong>Filament:</strong> Generic PLA Black</p>