Raspberry Pi 4 DIN Rail Mount with M3 Rivet Nuts

prusaprinters

<p>First of all - Thanks to uwearzt!<br>Also thanks for sharing the Fusion360-File. This helped a ton!</p><p>I modified his nice, minimalistic Din-Mount for the Pi4 a bit to use my M3 rivet nuts to fix the Pi4 without any Spacers and other stuff. Only four M3x10 screws - done.</p><p>I printed it in PETG with little support in the overhangs (holes for the rivet nuts), which are really easy to remove.</p><p>One Note:<br>To mount the Pi I had to enlarge the holes by 0,5mm. I simply tapped through the existing ones, which still have more than enough clearance for the screws without touching any electronics, as you can see on the picture.<br>maybe one time i edit this for the usually used 2.5mm screws (simply modifying the width of the holes) to use &nbsp;rivet nuts but at the moment i just don't have any, so i made it work that way. anyway i am pretty happy how this turned out and i'll use it as is.</p><p>hope this is useful for someone else.</p><p>cheers! and happy printing!</p>