Raspberry Pi 4 Model B + PICAN-M case
cults3d
Case designed for Raspberry Pi 4 Model B with PICAN-M HAT (NMEA 2000 and NMEA 0183). The system is powered via the NMEA 2000 connector on the PICAN-M. Case lid is designed to fit a standard 30x30 mm fan. The cut-out in top of the lid is made for ventilation of the electronics. The SD card can be removed without removing the Raspberry Pi from the case. Installation in case is at own risk, and should be done carefully to protect the Raspberry Pi and PICAN-M. Installation: 1: Install the Raspberry Pi in case. Use 4 screws and HEX coupling nuts supplied with the PICAN M. 2: Carefully fit the threaded NMEA 2000 connector in the case, and rotate the PICAN-M in place over the GPIO pins. 3: Use the remaining 4 screws to secure the PICAN-M to the Raspberry Pi.
With this file you will be able to print Raspberry Pi 4 Model B + PICAN-M case with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Raspberry Pi 4 Model B + PICAN-M case.