Raspberry Pi Camera Module 3 + HDMI Case

thingiverse

Raspberry Pi Camera Module 3 + HDMI Case This is a casing designed to accommodate the new Camera Module 3, along with an HDMI adaptor board which allows the camera module to be extended up to 5 metres away from the raspberry Pi, using an off-the-shelf HDMI cable. The Camera Module 3 is autofocus, so clearance has been designed into the case to allow the lens assembly to move.There is no facility on the camera lens to allow use of a manual focussing spanner. The adaptor boards (supplied as pairs) are available from https://shop.pimoroni.com/products/pi-camera-hdmi-cable-extension?variant=4585578945 (Preferred - also directly available from Petit Studios) or https://thepihut.com/products/raspberry-pi-camera-hdmi-cable-extension (NOTE: The Arducam board has a 3.5mm jack socket which WILL need to be removed by desoldering otherwise it will not fit into the case as currently designed) I designed it to be screwless, apart from the screws that come with the HDMI boards to hold them to the camera module - see pictures. The lid is a really tight fit, at least on my print, but you may need to put something between the lid and the back of the HDMI board to stop it all rattling around depending on your print tolerances.