Raspberry Pi Camera V2 Snapmaker 2 Toolhead Mount

thingiverse

A mount to attach your [raspberry pi v2 camera](https://www.amazon.com/gp/product/B083BHJZ16/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1) to the toolhead of your [Snapmaker](https://snapmaker.com/product/snapmaker-2). This allows you to aim the camera directly at the extruder nozzle so you can closely inspect layers as they go down to ensure no problems. Mounting hardware ([All came in this kit](https://www.amazon.com/gp/product/B015A34BUQ/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1)): - To replace the toolhead screws - 4 M2x6 - For the toolhead mount <> horizontal arm - 1 M2x10 screw - 1 M2 nut - For the horizontal arm <> sliding mount - 2 M2x8 screws - 2 M2 nuts - 2 M2 washers - For the sliding arm <> vertical arm - 1 M2x14 screws - For vertical arm <> pi camera v2 - 4 (or 2 if you're lazy) M2x4 screws - You might wants nuts too (again, if you're not lazy) **NOTE**: I messed up a bit on the dimensions, so the vertical arm must attach to the toolhead mount one rung "up" from where it was originally designed. I moved the object up in the f3z file though so you can see what to do. **If you mount it in the original designed location, the camera will probably run into your prints if it's able to see the extruder nozzle.** (all the shots below have it in the right position though)