Raspberry Pi Friction Fit Inlay

prusaprinters

<p>This is a friction fit inlay for a Raspberry Pi Stacking tower design (<a href="https://www.thingiverse.com/thing:2187350">https://www.thingiverse.com/thing:2187350</a>)</p> <p>A friction fit inlay for the original tray which allows for screwless installation without printing a whole new tray and wasting ~ 3.6 meters of filament since this only required ~1.7 meter and saves ~ 95% of the original tray from the trash bin/scrap grinder/filament melter.</p> <p>Compatible with at least:</p> <ul> <li>Raspberry Pi 1B without mounting holes</li> <li>Raspberry Pi 1B with mounting holes</li> <li>Raspberry Pi 3B+* use v2</li> <li>Raspberry Pi 4B* use v2</li> </ul> <p>v1 had clearance issues with common micro USB plugs, v2 is moved "forward" a little but still doens't stick out, note some micro USB connectors might still be tight, but nothing a little sanding doesn't fix! ;)</p> <p>For those wondering no, it won't perfectly align with the original, the Raspberry Pi 1's will still have their USB ports protruding a bit, but the ethernet port and the USB ports of the Raspberry Pi 3B+ the ports won't protrude beyond the outside frame.</p>