Raspberry PI Support (Pimoroni Pibow Coupé supported)

thingiverse

This is a support for the Raspberry PI - just the board, or with Pimoroni's Pibow Coupé. It fits versions for the Raspberry PI 4, Raspberry PI 3, probably also version 2. It's based on [Adafruit's Raspberry PI Zero Support](https://www.thingiverse.com/thing:3424130/). I find that one just beautiful and since there's none for the Zero Big Brother, I've decided to build one . Assembly --------------------- There's two versions of the support * **RaspberryPI_support_Pimoroni_coupe.stl** Fits the Raspberry PI inside the Pimoroni's Pibow Coupé - Versions for the Raspberry PI 4 and Raspberry PI 3 (and others also) * **RaspberryPI_stand.stl** to use with the barebones board. Fitting --------------------- * The version for the Pibow will fit M3 screws - just use the ones that come with the Pibow (close fit in length) or use longer M3 screws * The barebones version will fit M2.5 screws. In the photos I've used some M2.5 brass standoffs and screw the Raspberry PI to them.