RaspberryPi Kubernetes stack
thingiverse
Layer board and a top with the kubernetes logo for creating a RaspberryPi 2 stack. You will need a nice set of 2.5mm plastic / metal spacers with adequate nuts and bolts. Print with a bigger infill percentage to ensure the boards will be strong enough. The kubernetes logo is taken from the open-source repository on github: https://github.com/kubernetes/kubernetes/blob/master/logo.svg and converted to STL via http://svg2stl.com/. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: Yes Supports: No Resolution: 0.1mm Infill: 50% Notes: A brim will be nice, cause it will prevent the edges from warping and thus making a non-flat board. Print with higher infill, and lower speed on the initial level to make sure that the details are printed nicely (especially the holes).
With this file you will be able to print RaspberryPi Kubernetes stack with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on RaspberryPi Kubernetes stack.