Rat Rig 3030 extrusion phone mount

prusaprinters

<p>Needing to mount my phone to my coreXY printer (<a href="https://v-core.ratrig.com/">RatRig vcore 3</a>) i designed this mount which uses the same 12mm M6 bolts and T-Nuts that the Ratrig frame uses.</p><p>&nbsp;</p><p>Can hold a pixel 6 while charging or any phone with dimensions similar (but not wider or deeper than 75mmx9mm).</p><p>&nbsp;</p><pre><code class="language-plaintext"> Included .f3d file so you can edit the dimensions to fit pretty much any phone, even tablets! I have no idea what i'm doing in fusion, so if you go through the design history you'll see my jank in all its glory, but essentially you can edit the first sketch in the timeline (Labelled EDIT ME) and change the dimensions of d1 and d2 lines which are by default 75mm and 9mm. Make these 2 lines whatever dimension your phone is (+0.2mm clearance recommended) and it will resize the various parts and keep the hole for the charging cable in the centre. Again i have no clue how to use fusion beyond the basics so there is probably 100 better ways of doing that, but it seems to work out. You can also edit the hole parameters if you want to use a different size screw from the default M6.</code></pre><figure class="image image_resized" style="width:95.27%;"><img src="https://media.printables.com/media/prints/180634/rich_content/c26e96ca-ada9-4fab-8bfd-42e791b9a82e/how-to-edit.png#%7B%22uuid%22%3A%22fb5b6a8c-5b76-4582-84a6-0161015a58d0%22%2C%22w%22%3A1230%2C%22h%22%3A798%7D"></figure><pre><code class="language-plaintext"> Alternatively you can message me with whatever phone you want and i can resize the mount and upload an stl for that file.</code></pre>