Ray gun prop - print in parts for smaller printers

prusaprinters

<p>WerkRaum's model (originally based on https://www.thingiverse.com/thing:2091732) is awesome, but I wanted one I could print in different parts rather than sand-and-paint.</p><p>This version was remodelled from scratch using that design as reference, and split into parts which would fit on the MINI+. &nbsp;It doesn't include the electronics and working trigger so is just a static prop.</p><p>3mf files include filament changes and supports where needed if opened in PrusaSlicer.</p><p>f3d file includes a parameter <code>fit</code> to adjust the gap tolerance where the pieces fit into each other.</p><h4>Assembly</h4><ul><li>primary colour<ul><li>print the body left and right and glue together</li><li>print the handle and trigger and glue into place</li></ul></li><li>trim colour<ul><li>print the sides and fin and glue into place</li></ul></li><li>filament change - both colours<ul><li>print the antenna with trim colour and the tip in primary colour (or a bright danger colour if you prefer!)</li><li>print the barrel+trim starting with trim colour and alternating filament every change.<ul><li>attach the barrel to the body and glue the rings/bauble to the other end</li></ul></li><li>attach the antenna to the barrel</li></ul></li><li>stand colour<ul><li>Optionally print the stand to give your model somewhere to sit until you need it.</li></ul></li></ul><h4>License</h4><p>As a remix closely based on but not using any actual part of another design, I've chosen to follow the CC-BY-NC-SA license chosen by that designer.&nbsp;</p>