razor with safety cap

thingiverse

razor blade holder with a slip-on safety cap update: additional handle with a hole for a square nut M3 (thanks to Nutshell) hello, here is a razor. needed are standard razor blades, a screw M3 x 20 mm (stainless steel) and a brass insert nut (M3 x Ø5 x 6 mm). the screw is screwed into the upper part, insert the blade, put on the lower part and screw on the handle. a cap protects you and the blade. three different cap shapes to choose from: 1. without blade slot 2. more compact for one blade 3. with flat side for two blades (watch the video how it works) please note - do not insert unpacked blades into the cap. the components are printed as they are stored as stl. layer resolution 0.15 - 0.2 mm. all parts are printed without support. a brass insert nut is melted into the handle with a soldering iron. the links serve as orientation for appearance and parameters: https://aliexpress.com/item/1005004535859664.html please be careful - razor blades are very sharp. please test the razor before you hurt yourself. the shaving result depends on the printing result. https://youtu.be/_2Ezp95lp68