RC Axles with SCX10 I Parts

thingiverse

I was looking for a cheap alternative for 1/10 Axles. I already tried some from thingiverse but decided to add another version. The target is to make them solid and as small as possible. It is not ready to print yet because it is still a Work-In-Progress. Updates: 2019-05-23: STL-Files with more beefed Axles for 3-4-Link Setup 2019-03-18: User GothDog improoved the C-Hubs. Maybe you can use them: https://www.thingiverse.com/thing:3499599 Thx GothDog 2018-12-06: STL-Files for 3-4-Link Setup on Yota-Style-Axels; 11mm Bearings 2018-12-04: All STL-Files V1... are tested. You might need to sand/drill it to have a perfect fit but they soon work; 11mm Bearings 2018-12-03: Rear Axle is ready to print. First testprint turned out fine. STL files for leafspring setup -> uploaded. 2018-11-30: 2 STL for Rear Axle Houses for M3 Nuts and Screws without Link-Mounts 2018-12-01: First print; not the perfect fit but close... :-) We will see if it will work in the near future. If it works it will be a quite cheap way to build working axles at a price of approx. 12 EUR plus the used filament for two axles. I used the following metal parts: https://www.aliexpress.com/item/13T-38T-Metal-Crown-Gear-Motor-Differential-Main-Gear-Combo-for-Front-Rear-Axle-AXIAL-SCX10/32880264070.html?spm=a2g0s.9042311.0.0.27424c4dUz2BZP https://www.aliexpress.com/item/2PCS-Hard-Steel-Front-Axle-CVD-Drive-Shaft-for-1-10-Axial-SCX10-Upgrade-Option-Parts/32806061238.html?spm=a2g0s.9042311.0.0.27424c4dUz2BZP https://www.aliexpress.com/item/2-Pack-HobbyPark-Straight-Rear-Axle-Drive-Shaft-Dogbone-for-1-10-Axial-SCX10-RC-Rock/32818000189.html?spm=a2g0s.9042311.0.0.27424c4dUz2BZP As Bearings you can print the ones I added als STL or you use metal ones of 10x5x4 and 15x10x4. I guess there will be a second version of the axels because besides the 10x5x4 there are 11x5x4 ones. If you have any comments or ideas let me know.