RC Model Control Horns

thingiverse

###Control Horns Various control horns for model Aeroplanes. They are fully parametrised but without error checking. ####Parameters |*Parameter*|*Default Value*|*Description*| |----|---|----| |hornBL |36|Length of the control surface| |hornH |12.5|OA height of horn| |hornO|5|Connection offset | |holeN|1|Number of holes| |holeDia|0.8|hole dia| |holeTop|9|distance from bottom of horn to top hole| |holeBottom|9|distance from bottom of horn to bottom hole| |controlT|0|Control surface thickness| |plateHoles|1.8|fixing holes| ####Modules |*Module*|*Description*| |---|---| |LH_Horn();|Fixing plate on left hand side| |RH_Horn();|Fixing plate on right hand side| |Horn();|Draw Horn| |Fix_Plate();|Adds a flat with screw holes to the horn| |Horn_X();|A flat plate with screw holes cut to allow the horn to be inserted| |Rt_Plate();|angle plate use two to sandwich the control horn| ###Flite Test Mini Control Horns 3D printed version of the Flite Test Mini control horn. ####Parameters |*Parameter*|*Default Value*|*Description*| |---|---|---| |plateX|21.5|Length of horn| plateY|18|Height of horn| plateThck|2; |Plate thickness. Plywood ones are 1.5mm| push_hole_r|0.5;| Mark the hole centre drill it out to correct size| ####Modules |*Module*|*Description*| |---|---| |Control_Horn|Draw the control horn| ####Hint These parts need to be strong. Print with 3 or 4 shells and 50% or greater fill. ####Sources [Flite Test](https://store.flitetest.com/a-pack-planes/)