RDQ Source One V3 Street League Spec Prints

thingiverse

Here are my street league prints. Mine needed about 80g of weight added to pass the 1280g spec when printed at 50% infill with 4 walls plus alternating extra wall. Shell fits Foxeer Razer Nano camera. Arm covers fit Brotherhobby Avenger 2808. The fin/top plate cover is designed to hold up to 14 of these sinkers. Use the spacer and scale to fit to take up the extra room. I used a strip of gorilla tape to stop the sinkers from wearing against the top plate. https://www.amazon.com/gp/product/B09P1H1B2D/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1&psc=1 The 20X20 Mount To 30X30 Stack lets you use the 20x20 holes to mount a 30x30 stack so you do not need to mess with the stack screws when swapping arms. Battery box fits CNHL 5S 2200mah with room for balance leads to be shoved in. It should be printed standing on the closed end with supports only on the tabs, I used a 20mm brim to help with bed adhesion. The added venturis and channels help keep battery cooler. It makes a little difference, but the battery still gets pretty warm.