Redcat Gen 8 V3 Relocated ESC/Receiver Mount

thingiverse

This is version 3 of 3 different designs of alternative ESC/Receiver mounts for the Redcat Gen 8 International Harvester Scout II scale crawler. When you use narrower aftermarket bodies, you'll need to relocate the receiver and ESC since the original side guards (including the ESC/receiver mounts) will be removed. Additional hardware needed: 3pcs: M3x6mm flat head screws The ESC mount is labeled as "Gen 8 V3 ESC Mount.STL". The receiver mount requires two files, "Gen 8 V3 Receiver Mount Top.STL" and "Gen 8 V3 Receiver Mount Base.STL". The two pieces are bolted together using 3pcs of M3x6mm flat head screws. The attached picture shows how the mounts are intended to be installed. No additional hardware is needed, just use the existing screws as shown in the attached pictures. #####Redcat parts on Thingiverse are released under the Creative Commons License Attribution- NonCommercial- ShareAlike 4.0 International (CC BY-NC-SA 4.0). We want to share these parts with the world, and we want to inspire people to make and share their own parts for their vehicles. >In keeping with the non-commercial clause of this license, if you produce this part <b>(Gen 8 V3 ESC Mount.STL) or (Gen 8 V3 Receiver Mount Top.STL) + (Gen 8 V3 Receiver Mount Base.STL)</b> for others, you may not receive compensation in excess of <b><u>$1.00</u></b> per part, plus your shipping costs. This number is calculated based on an average estimate of material cost and machine running costs.