Remix pendulum mechanical clock

thingiverse

HI everyone.This mechanical clock was previously made by two smart guys ( A26 and krahut) and I assembled it into a collection with small changes. change - In many places metal ball chains are very rare, so I used (plastic ball chains with a diameter of approximately five millimeters per ball) - If you do not have a shaft, you can cut it from the flat part of a metal hanger - Be sure to use ball bearings for easy and smooth rotation of the shafts - If the bearing with an inner diameter of 3 millimeters and an outer diameter of 6 is not found, you can use other sizes that only have an inner diameter of 3 millimeters. in new update I added two more pieces Numbers face numbers face stand update 23.08.2021: i designed a cover chain into weight for Hold the chains on the motor wheel tight . update 02.09.2021 : To get a much better result, please use metal chains. But if you want to use metal chains, you have to change a number of parts according to the size of the chain balls. Chains are usually 3.2 mm in diameter per ball 1- motor wheel 2- drum a I also put these two pieces for download. update 20.9.2021 If you use chains with 4.5 diameter balls, you should use new motor wheel(15.5motorwheel 4.5ball) But you have to use your own initiative and open the way for the chain to pass for this size of chain (4.5 mm)