Remixed Tape Dispenser for 50 mm (2 Inch) wide Tape

cults3d

This is an evolution of the 2 inch tape dispenser from E step. This remix is again more wall stable. Has a pull through bottom plate to be able to tape on a weight plate, and/or anti-slip pads. Increased the pressure gap between the roller axle and roller pickup. There is no need to rework. Note, to reduce friction, please coat the roller axle with petroleum jelly (as a lubricant). Keep it sparingly. You can forget about the roller mount from e step. Unfortunately, the glue rollers have an inner diameter of 50.8 mm down to 48.4 mm. This range of dimensions needs a flexible mount. Here 5-fold springy. Another mistake made by e step was, the holes for the M4 countersunk screws were not deep enough. Thus had to shorten the screws on the bench grinder to an exact dimension. This is now no longer necessary. The hole are now continuous. M4 x25 screws still work as well. Otherwise, the assembly and function, is the same as the e step scooter. Note: The fit on the cutting head to the sidewall may need to be reworked with a file to make it fit. But is desired so that the cutting head does not wobble, Or, has a tight fit. Very stiff PLA, such as: GOLD, TRANSPARENT colors or snow white, polar white, as well as the stiffer PLA+ is better for the cutter than regular colored PLA. Accessories: 6 x countersunk screws M4 x20 As well as 6x M4 nuts. as well as rubber adhesive pads. Addendum: Many thanks to Estep for the idea and the design.