RepBox rollers

prusaprinters

<p>I found the TUSH style spool rollers in the RepBox to be a bit fidgety. While holding a spool and trying to slide them to align, I was always knocking them over.</p> <p>Since I never have more than 5 spools in the box at a time, and the vast majority of my spools are all under 3.5" wide, I decided to make a bunch of individual spool rollers that run the entire length of the box.</p> <p>This allows me to just drop a spool onto one of the 5 sets, no alignment needed.</p> <p>The rollers use the original bearings. Bearings should press in, I used a threaded rod with some washers and nuts to press the bearings in, they were tight.</p> <p>You'll need to print 20 of the Roller-ends, and 10 of the Rollers.</p> <p>I've included the Fusion files in case someone wants to enhance the design, or needs to tweak the clearances for their box.</p> <p>Note that this was designed for the v1/1.5 RepBox. I believe the newer v2 is larger, and may have a different bottom panel. I have no idea if these will work in the new RepBox.</p>