Replicator X Belt tension tool
thingiverse
Use this tool to help adjust your X belt tension. Simply loosen your X motor screws, slide the tool over the bottom of the motor and adjust the thumb screws until the desired tension has been achieved. Tighten your motor screws and remove the tool. Instructions Print with supports. I used 3 shells and 20% infill just to make sure its super stiff. Tap the holes with 1/4-20 tap. I strongly suggest tapping your part under cold water. This helps lubricate and cool the tap. Install 1/4-20 x 1-1/2" thumb or cap screws (http://www.mcmaster.com/#91185a422/=rk6ai9)
With this file you will be able to print Replicator X Belt tension tool with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Replicator X Belt tension tool.