RepRapGuru Heatbed wire strain relief
thingiverse
For the RepRapGuru Prusa I3 V1 and V2 This attaches to the Y-carriage underneath the heatbed. Mount it in the back left corner, pointing towards the back of the printer, with the curved end pointing up (so in case it should sag it will ride over the frame below it). Ziptie it in place. On the flat arm, attach a zip tie anchor block with adhesive back. Then zip tie the power and thermistor wires coming off of the heated bed, to relieve strain and stop the wires from cracking off due to Y axis movement. Inspired by thing #1940087. Redesigned in Fusion 360 from scratch. Updated V4: Shortened up the width of the piece to avoid striking the Y-Axis motor at the back of the travel. Now has >8 mm clearance. Print Settings Printer: RepRapGuru I3 v2 Rafts: No Supports: No Resolution: 0.2 mm Infill: 30% Notes: ABS or other high-temp (not PLA)
With this file you will be able to print RepRapGuru Heatbed wire strain relief with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on RepRapGuru Heatbed wire strain relief.