Retainer clip for Corsair Vengeance K70 keyboard wrist rest

prusaprinters

<p>A simple replacement retainer clip for the wrist rest that snaps onto the front of a Corsair Vengeance K70 keyboard. Carefully scrape off the remnants of the broken clip on your wrist rest, leaving a smooth surface, rough it up a little if necessary, then download and print this and epoxy it on.</p> <p>On the bottom of the wrist rest, the clips are arranged in pairs - this is for the left one of each pair (though the photo belies this). You should be able to simply let your slicer mirror the part along X or Y if you need to replace one of the right clips.</p> <p>If you need to replace both clips, print one of each and then break off one of the "base" sides, as needed.</p> <p>When mounting to your wrist rest, leave 8.1 to 8.2 mm between the left and right clips in the pair.</p> <p><strong>Update 2018-04-18:</strong> I uploaded a thicker revision of the clip, a mirrored version of it, and a double version (i.e. if both clips on either side of the wrist rest need replaced).</p> <h3>Print instructions</h3><h3>Licence: Creative Commons - Attribution Category: Replacement Parts Print Settings</h3> <p><strong>Printer Brand:</strong> RepRap</p> <p><strong>Printer:</strong> Prusa i3</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> Yes</p> <p><strong>Resolution:</strong> 0.2 mm</p> <p><strong>Infill:</strong> 100%</p> <p><strong>Notes:</strong></p> <p>Use a 5-10 mm brim also. Recommend adding "sacrificial" objects to the plate to give the upper layers more time to cool. Printing two of these at a time helps also.</p> <h3> Post-Printing</h3> <p>Depending on the accuracy of your printer, you may want to consider sanding the mounting-side of the part smooth for best results.</p> <h3> How I Designed This</h3> <p>Drawn by hand on paper from measurements taken with my calipers, then modeled the results in Blender.</p>