Retro Toy Rocket (DO NOT print optional lithophane for 2022 holiday print drive)

prusaprinters

<p>NOTICE: &nbsp;If you are printing this for the 2022 LM Show Christmas community print drive, please follow the guidelines posted at <a href="https://print.thelmshow.com/pages/2022-christmas-community-print-drive-guidelines">https://print.thelmshow.com/pages/2022-christmas-community-print-drive-guidelines</a> to provide strong safe toys for the kids.</p><p>This is my first attempt at modeling. &nbsp;I used the Fusion360 free version.&nbsp;</p><p>The rocket model prints out to 98mm tall and consumes approximately 41g of filament at 15% infill. I printed it at .2 layer height and sped the printing up to 150% once the print got high enough to support all three struts and the fuselage as one. &nbsp; It took me about 3h 40m to print on a Fokoos Odin-5 f3. &nbsp;No supports, printed sitting on its base. I used Polymaker PLA Pro Red.</p><p>The lithophane is tiny (17.5 mm dia) and prints in 10 minutes at a reduced speed. &nbsp;I used 0.12 layer height @30mm/sec. &nbsp;I printed this with Polymaker PLA Pro white but any white PLA should work okay. I used lithophanemaker.com to create it, so if you want to make a different pic go there! &nbsp;If you choose this option it <strong>MUST</strong> be glued in for child safety. &nbsp;you will notice that it doesn't snap in because I filleted the ledge in case little fingers entered while in telescope option mode. &nbsp;If you have older eyes like me you must hold the rocket away from your face to focus and look toward a bright light. &nbsp;It's a work in progress I guess!</p><p>If you print this please upload your photos to Printables so I can see your models. &nbsp;I think color change stripes would look amazing! &nbsp;Enjoy!</p>