Reusable Keurig Coffee Pod (K Cup) Filler Tools

thingiverse

A measuring scoop and funnel assembly to help fill reusable Keurig coffee pods (K Cups). I got mine from Amazon.com (see https://www.amazon.com/gp/product/B074T688XM/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1). The scoop files are named KCupScoop.*. The OpenSCAD file says that the scoop should hold 35 ml of beans/grounds but the print turned out to hold only around 32ml. But that is good because the lid of the reusable pod has a water inlet piece that takes up some of the pod volume. All of the filler thing STL files are generated from HingedKCupFiller.scad. It consists of two parts, the pod holder (base) and funnel (top). There are a lot of STL files for the filler thing to give you lots of options on how to print and connect them. (See comments near the top of the OpenSCAD file for details.) The STL files containing "Base" in their names are for the bottom part only and those containing "Top" are for the funnel part only. Files containing "Both" are for printing the top and bottom side by side. Files containing "Single" are for printing the whole thing in one go. Files containing "Bolt" are for using a #4 by 1 inch (or M3 by 25 mm.) bolt in the hinge. (This is probably the easiest way to assemble the thing.) Files containing "Spring" are for using spring loaded pins in the hinge (similar to how a watch band connects to the watch). (See the picture with the red filler.) Files beginning with "NonHinged" are for using three Lego style connectors to align the funnel top with the base instead of a hinge. (See the picture with the purple filler.) Files containing "Test" are for printing test versions of the thing which include only the layers containing the hinge (or Lego studs).