Revised Apple iPhone Magsafe and Apple Watch Charging Stand

prusaprinters

<p>My design for a stand that holds both the Apple iPhone MagSafe and Apple Watch wireless chargers so you can view and charge both devices at the same time. It holds both chargers flush with the front face of the stand and features a groove to route the cables down and out the back.<br/> Just a bit better than the first version, new features include a more hidden cable routing with retention tabs, a skinnier but deeper foot print than the first one I made, all while being easier to print in my opinion. Let me know what you think.</p> <h3>Print instructions</h3><h3>Category: Mobile Phone Summary</h3> <p>My design for a stand that holds both the Apple iPhone MagSafe and Apple Watch wireless chargers so you can view and charge both devices at the same time. It holds both chargers flush with the front face of the stand and features a groove to route the cables down and out the back.<br/> Just a bit better than the first version, new features include a more hidden cable routing with retention tabs, a skinnier but deeper foot print than the first one I made, all while being easier to print in my opinion. Let me know what you think.</p> <h3> Print Settings</h3> <p><strong>Printer Brand:</strong> Prusa</p> <p><strong>Printer:</strong> I3 MK3S</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> Yes</p> <p><strong>Resolution:</strong> 0.15</p> <p><strong>Infill:</strong> 15%</p> <p><strong>Filament:</strong> Duramic 3D PETG Black<br/> <strong>Notes:</strong></p> <p>Printed it on the back with supports and a brim. The brim may or may not be necessary.</p>