rEvo III Rebrether Drying Splash Guards

thingiverse

## Contents * Scrubber * Main model providing the primary shape for the scrubber cover * Vent Modifier model to be used to remove top/bottom perimeters allowing for ventilation * Male Cap * Main model providing the primary shape for the covers to go on the ends of the loop * Vent Modifier model to be used to remove top/bottom perimeters allowing for ventilation * Female Cap * Main model provides the cap, no vent is provided to prevent the ingress of rain ## Printing instructions These instructions are written for PrusaSlicer 2.1.1 but can likely be adapted as needed. All three components can be printed at once on a Prusa Mk3 requiring only two identical prints for a complete set of guards. 1. Import the main models. 2. With one model selected, right click on the `Editing` box on the right for that model. 3. Select Add Modifier > Load... and select the appropriate vent modifier from the download. 4. Right click on the `Editing` cog for the modifier and select `Layers and Perimeters`. 5. At the bottom of the parts list, edit the modifier to have 0 perimeter layers top/bottom. The photos provided (modified to include branding) were printed with PETG at 15% gryoid infill, except the scrubber cover vent modifier also had an infill adjustment up to 20% to provide a slightly denser mesh. The gyroid pattern produces a complex pattern that it is difficult for water to pass through against gravity, but easy for air to move around allowing for drying. If using PETG I recommend testing the adhesion first as they can separate easily.