Ring and Jewelry Dish
prusaprinters
<p>My wife asked if I could make her a jewelry dish to hold her rings and earrings using some FormFutura Granite StoneFil filament. It has a nice smooth feel and the matte grey looks quite nice on smooth shapes.</p> <p>I have uploaded a few versions which were modeled slightly different ways. Version 3 was printed. The StoneFil gives it a nice smooth concrete or sandstone look.You can vary th extrusion factor to give the surface finish more of a porous look</p> <h3>Print Settings</h3> <p><strong>Notes:</strong></p> <p>3D PRINTING SETTINGS</p> <p>Resolution:</p> <p>0.15 layer, 0.6 nozzle</p> <p>Infill:</p> <p>25% cubic</p> <p>Filament: FormFutura StoneFil PLA Granite</p> <p>Notes:</p> <p>Printed at 50mm/s at 210c. It took about 6 hours.</p> <p>Take note of the ring spikes. Make sure you use a minimum layer time to keep them from overheating. Your retraction will also need to be dialed in to prevent stringing.</p> <p>You can likely print the base much faster.</p> Category: Jewelry
With this file you will be able to print Ring and Jewelry Dish with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Ring and Jewelry Dish.