Ring Pro Mount for 4" clapboard

prusaprinters

<p>I couldn't find exactly what I wanted for the Ring Pro doorbell mount. I have ~4" clapboard on the exterior of my home and I needed specific angles for each the front and side door so I designed mounts with the 20 degree to the side for the front door and the 5 degree up that I needed for the side door. &nbsp;I have been using them for a couple of years now and they have worked great. I also have a zero degree model that can be modified for whatever angle you need. Solidworks file included.</p><p>The mount has a recess for the ring pro to sit in, a nice large open middle to accmodate the wires, two recessed screw holes to screw it into the clapboard with the provided screws and two holes to mount the ring pro to the mount. There is also a cusp underneath to fit nicely under the clapboard along with some drain holes to keep it from holding water.</p><p>Printed out of Amazon Basics PETG since it is outside I did both 0.1 and 0.15 mm layer heights but you could probably do 0.2</p>