Ringlight Mount for Anycubic Kossel Linear Plus

thingiverse

This is a two piece mount to mount a 10" ring light over an Anycubic Kossel Linear Plus. I've found this to be a good fit for making timelapses as it provides fairly even light regardless of the position of the effector. It should work for any delta really that uses 2020 extrusion but the light may not be centered. The 10" ring light I used is this one: https://www.amazon.com/gp/product/B07XB5MT3S/ It uses two M4 hammerhead nuts into the extrusion, with two M4x8mm bolts into the smaller holes. The larger holes are for two 1/4-20 screws which thread into the two mount holes on the ring light. I printed these at 0.485 layer height with a 0.8mm nozzle but the print parameters shouldn't be critical for a simple mount like this. I would recommend printing this from anything other than PLA (I went for PETG) just because in my experience PLA becomes brittle over time in applications like this and one day it'll just crack/explode and the ring light will crash down onto the effector.