Rival Knockout Barrel/Muzzle

prusaprinters

<p>designed for 8.5in 9/16 brass, uses 2 4-40x 3/8in screws from a caliburn to attach the barrel and slide. Cut the stock slide/barrel spring down so its just loose (almost no preload) and sand your brass as needed. Step files are included feel free to design your own muzzles to attach.</p> <h3>Print Settings</h3> <p><strong>Supports:</strong></p> <p>Yes</p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2mm</p></div> <p><strong>Notes:</strong></p> <p>I recommend printing both with 2 walls and 15%infill to save weight, If your slicer allows it increase the walls around the spring hook to at least 4.</p> <p>The Replacement Barrel does not need supports, the Square Suppressor does, make sure all support material is removed before assembly there should not be any gaps between the 2 parts.</p> <h3>Post-Printing</h3> <p>I did not have to sand the shell on my painted knock out, if you get to much paint on the inside you might.</p> </p> Category: Hobby