Rival Zeus Magazine Ejection Plate

thingiverse

The Rival Zeus has become quite obsolete with the release of more effective rival blasters. However, for those who still have one, this part solves the biggest issue (reloading) while also giving the blaster a sleek appearance. The plate consists of 3 printed parts that need to be glued together and a spring which ejects the magazine. The plate screws to the blaster with 5 self tapping screws so it can be removed although you can also glue it in place if you wish. For printing, orientate all the parts vertically on one of the flat surfaces. You will need supports for the screw mounts. The image shows a plate printed in ABS and then sanded smooth although it should print well in PLA or other materials. After printing, you will need to glue the 3 parts together with epoxy resin or solvent weld. You can place them into the blaster to help with alignment. Additional Parts: Spring: https://www.amazon.co.uk/HALJIA-Printer-Extruder-Ultimaker-Makerbot/dp/B075KHPVBL/ref=sr_1_50?ie=UTF8&qid=1536489205&sr=8-50&keywords=9mm+spring Self Tapping Screws: https://www.amazon.co.uk/sourcingmap%C2%AE-100pcs-Stainless-Tapping-Screws/dp/B01LZE42EA/ref=sr_1_2?s=electronics&ie=UTF8&qid=1536489310&sr=1-2&keywords=M2.5+Self+tapping+screws Note: You may have to upgrade the mag-release spring when using this as under blaster vibration the magazine can occasionally pop out. Alternatively, you can print it without the back section and just release it by hand.