Road sign money box

prusaprinters

<p>For a milestone birthday we wanted to give money to a friend so that he can buy a new bike. To allow people to contribute directly at the party, I wanted to design an attractive money box. This is my result.</p><p><strong>Print Settings</strong></p><p>Resolution:<br>0,2mm</p><p>Infill:<br>15%</p><p>Filament material:<br>PLA</p><p>Notes:</p><p>The main part moneybox is already properly oriented for printing. In the lower area where the lid is then inserted, I have inserted local support structures, the rest works without.</p><p>I have oriented the two signs so that the back side lies on the print bed. At 0.8mm I have inserted a color change.</p><p>&nbsp;</p><p><strong>Post-Printing</strong></p><p>For gluing the parts I used 2 components epoxy glue. First I glued the red ring on the speed limit traffic sign. Then the two traffic signs on the sides of the piggy bank.</p><p>Finally I mounted the lid with 2mm screws.</p><p>&nbsp;</p>