Rod and Tube Cutter for Dremel

prusaprinters

<p>Modifications:</p> <ul> <li>Removed the base so that it is faster to print </li> <li>Modified the connector of the two parts to fit a 8.2 mm rod instead of the 10mm rod.<br/> I used the IKEA screws to fix the part to the wooden plate. they have a 6mm head and a 4.2mm shaft.</li> </ul> <h3>Print instructions</h3><h3>Category: Tool Holders &amp; Boxes Summary</h3> <p>Modifications:</p> <ul> <li>Removed the base so that it is faster to print </li> <li><p>Modified the connector of the two parts to fit a 8.2 mm rod instead of the 10mm rod.<br/> I used the IKEA screws to fix the part to the wooden plate. they have a 6mm head and a 4.2mm shaft.</p> <h3>Print Settings</h3> </li> </ul> <p><strong>Printer Brand:</strong> Prusa</p> <p><strong>Printer:</strong> I3 MK3S</p> <p><strong>Rafts:</strong> Yes</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0.3mm</p> <p><strong>Infill:</strong> 15%</p> <p><strong>Filament:</strong> Any ABS <br/> <strong>Notes:</strong></p> <ul> <li>Use a 1mm raft for the head</li> <li>Use a 10-15mm skirt around the objects if you don't have a closed chamber</li> </ul>