Romac+ (Romac Plus) Macropad Case

prusaprinters

<p>This is a simple drop-in case for the Romac+ macropad.&nbsp;</p><p>It should with a tiny bit of wiggle room but fairly snug, unless you have overextrusion problems. Mine just barely brushes against the walls as it's dropped into the case.</p><p>The print is pretty fast even if you use 100% infill, which is what you see in the photos. I also paused twice for this print, to switch to translucent filament then back to black in order to achieve that “shine-through” glowing look for the RGB LEDs.</p><p>&nbsp;</p><p>Print in photos created with:</p><ul><li>Ender 3 v2</li><li>Tecbears Black and Transparent PLA</li><li>200 degree c nozzle</li><li>60 degree c bed</li><li>glass bed</li><li>0.4 mm nozzle</li></ul>