Rope pulley katrol
thingiverse
Rope pulley The pulley diameter is 31 mm with a 6 mm groove. It uses 2 bearings for a smooth operation. The rope on the picture is 5 mm and runs very nice through it. It is possible that a bit of sanding is needed to make the bearing fit in the pulley. Parts to print: 2 sides 1 ring 1 pulley I printed them with (transparent) ABS 0.3 mm at 90% fill. Will also work with PLA or other plastics. No support is needed. The pulley wheel has a designed in support. You need to break this out. Other bits needed: 2x M4x25 (shown on photo. They just fit without washers) or M4x30 (better) bolts 2x M4 lock nuts 4x M4 washers (optional) 2x bearing 624ZZ 4x13x5 Print Settings Printer Brand: RepRap Printer: meldel90 Rafts: No Supports: No Resolution: 100um to 300um Infill: 90%..100%
With this file you will be able to print Rope pulley katrol with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Rope pulley katrol.