RPI Raspberry Pi 4 Case HQ Camera Mount

thingiverse

This design is for a Raspberry Pi 4 with an assembled aluminium heatsink case and a Raspberry Pi HQ camera. There a two variants available - the difference is that the HQ camera is mounted 180 degrees compared to the other variant. Please either print the *_A or the *_B parts. If there is no "_" then that part is used for both variants. You can mount this case on a mini tripod or on a microscope stand as shown in the pictures. Besides the printed parts you will need: * 1x [Raspberry Pi 4](https://buyzero.de/products/raspberry-pi-4b) * 1x [Raspberry Pi HQ Camera](https://buyzero.de/products/raspberry-pi-hq-kameramodul-hq-camera) * 1x [Flexcable 20 cm](https://www.ebay.de/itm/271865662841) (25 cm will also work) * 1x [Aluminium Heatsink Case for Raspberry Pi 4](https://buyzero.de/products/aluminium-kuhlkorper-gehause-fur-raspberry-pi-4-schwarz) ([Pimoroni](https://shop.pimoroni.com/products/aluminium-heatsink-case-for-raspberry-pi-4)/[No Name](https://www.amazon.de/gp/product/B07VD5L1VY)) * 4x DIN912 M2.5*6 screws * 2x DIN912 M2.5*8 screws * 1x [tripod](https://www.amazon.de/AmazonBasics-WT0352G-Leichtes-Mini-Dreibeinstativ/dp/B08V5NXSGM) or * 1x [microscope stand](https://shop.pimoroni.com/products/microscope-stand-with-0-12-1-8x-lens) Please see the instructions below for the print settings and the assembly or the disassembly of the box.