RS Aero Speedpuck mount
youmagine
I wanted a speedpuck mount for the RS Aero dinghy that has less risk of lines getting caught in the mount. Thus I designed this mount a bit more shaped than the original carbon mount (which is expensive too). The 3D printed mount is about 90 grams. I do recommend to use FormFutura ApolloX ASA material as it is UV resistant, water resistant, heat (sun) resistant and prints easy. But obviously thats your choice. What you do need is a button-fix Type 1 connecting base. Thats about 3 EUR/USD at the RS sailing store or other places. Additionally you will need stainless wood/metal screws: * 6x 3mm diameter - you clip them in length to about 10mm total length (so to not push through the back of the base; hence the middle ones could be a bit longer) * 2x 4mm diameter for the button-fix (length 10 - 30mm) I strongly recommend to use an additional thin line to secure the speedpuck itself (not the mount) at the vang cleat (see picture). Fusion 360 model: https://a360.co/33wmi1I
With this file you will be able to print RS Aero Speedpuck mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on RS Aero Speedpuck mount.