Rubbermaid desiccant box

prusaprinters

<p>Desiccant boxes contoured to fit the bottom of Rubbermaid 21 cup storage containers.</p><p>This was designed for the translucent containers containers work. However, I was able to confirm it also fits Zylar containers if you can still find them.</p><p>Two boxes fill the bottom of the container and sit flat with only a little gap in the long direction. I would recommend using PETG or ABS for a little more heat resistance in the dehydrator.</p><p>Each box holds approximately 60 grams of 2-4mm diameter silica gel desiccant. Box tops should be secured with an M3 x 8mm screw and nut.</p><h3>Print Settings</h3><p><strong>Printer: </strong>Prusa I3 MK3S</p><p><strong>Resolution:</strong> 0.15</p><p><strong>Infill:</strong> 15% gyroid</p><p><strong>Filament: </strong>eSun PETG Natural</p><p><strong>Notes:&nbsp;</strong></p><p>I originally intended to use supports for the M3 nut socket and you'll see them in the MK2S PLA prints. However, I forgot to enable them for the MK3S PETG prints. It turned out fine anyway(if a little messy) anyway.</p>