RUNCam Split 4 4K HD (Micro 14x14mm) Adapter Mount for Eachine Wizard X220 (not S, not HF!)

thingiverse

This is a RUNCam Split 4 4K HD (Micro 14x14mm) Adapter Mount for Eachine Wizard X220 (not S, not HF!) With seperate mountspace for the Controllerboard and also easy to access buttons! Also this Thing has a little spacer to save the Camera. Just 32 Grams with CAM installed!! Compatible with all the screws and spacers from the RUNCam and to put over the big spacers from the Wizard as in the pictures shown. The holders for the camera are a little bit tight due to personal preferences. you have to sandpaper them a little bit, until the camera fits exactly how you wishes she fits. The Walls on the side has holes for buttons (also in this print!) witch will perfectly fits and presses the Buttons on the Controllerboard of your runcam (OSD and Pause/Stop). On the other side of the print you can find a hole for easy access to the SD Card in the Controllerboard. The screws on the top for installing the controllerboard are hidden in the material. I Printed with following Settings (just thikness, speed and temperatur depents on your material and 3D Printer!): 0.12 mm Outterwall 0.12 mm Innerwall 4 Walllines 0.6 mm for top and buttom 20% fill, triangle 0.12 thickness, 2x fillline Please refere to the pictures. The adapter is printed upside down for filament saving! The buttom comes to the top. Or to the Buttom, how ever you want to install it on your Wizard ;-) This ist the Version 6 of the adapter. I made a few little corrections against V4/V5. Version 6.2 is with Text on the shell instead on the button. Also you can find the Buttons as seperat stl file in case you lose one, you havent to print the whole thing again. <img src="https://i.imgur.com/7BPNK4k.png" title="source: imgur.com" />