RWBY - Relic of Knowledge Hollowed

thingiverse

The Handle mount was split at the cylinder. to incorporate the blue you see in the show/concept-art as well as better support through the other pieces and connecting to the globe directly. so they can be printed as different colours. Hollowed out the globe. As well as made it fit directly to the Top lamp Piece with a hole for the top crystal to slide into. and added threading to the bottom with holes for 6x6x2mm magnets Created a threaded cylinder that screws into the bottom of the lamp. You can wrap an led strip around it and hold the battery bank in the hollowed out centre of the piece. https://www.amazon.ca/dp/B09JNSVJD4/ref=cm_sw_em_r_mt_dp_dl_5N4AWYT8P7P7C9MWHQEJ Modified the Lamp Bottom piece to have a hole for the led battery bank, threading for the led base, threading for the globe and magnet holes to line up with the globe The idea is having the bottom be easily able to screw off to insert and remove the battery bank. but I also wanted to have the accents always line up. the idea is the magnets will be the tell when to stop closing it and give enough pull to keep it tight Dont forget to download these files from the original 2x https://cdn.thingiverse.com/assets/06/cd/80/1a/41/Lantern_-_Side_accents.stl https://cdn.thingiverse.com/assets/4a/fa/f2/1a/87/Lantern_-_Ring.stl https://cdn.thingiverse.com/assets/21/12/1e/1e/5e/Lantern_-_lower_accents.stl