S-360-12 Power Supply Cover

thingiverse

I made this power supply cover for a 12v 30Amp power supply I got from China (S-360-12). It has 1 amp more capacity than the WEI HAO Brand S-350-12 Power Supply. There dimensions are very close; but the WEI HAO supply is 1mm wider. If anyone tries this design on the WEI HAO supply please drop me a line. I would really like to hear if it fit or not. I think it should fit; but I don't have one to check. These types of supplies have ver sloppy machanical tolerances. I have provided the .step files for tweeking the design to your supply. For construction Directions please go to the Instructable: (link will be up soon) Drop me a line if you have questions or comments. :) Good luck Adrian Parts List: 6 M3 x 8 Screws 2 M4 x 14 Screws 3 M4 x 8 Screws 2 M3 Nuts 2 M4 Nuts Power Entry Flange: TE Connectivity PN:1609112-1 DigiKey - CCM1962-ND Mouser - 592-1609112-1 UPDATE 1-2-2017: Added feet to stand the power supply on it's side. 3 M4x8 screws hold the feet on. (One of the feet only gets one screw. The supply only has one tapped hole at the back end) Print Settings Printer Brand: RepRap Printer: RepRap Kossel Rafts: No Supports: No Resolution: .2mm Infill: 30% Notes: To keep the parts from warping I set the bed to 70 deg and dropped it to 60 deg after the first layer was done.