Safe and secure Raspberry Pi B+ Case

thingiverse

Made from the ground up, with the use of the model of the Raspberry Pi B+ model I published here: http://www.thingiverse.com/thing:402498 and of course an actual board I used for test fit the case (drawing go so far). Overall, I used .2 and .25 mm gaps so, this case is a TIGHT FIT. Meant to securely house a Raspberry Pi B+ v1.2 2014 board using 4x 20mm M3 socket head screws. It is a "natural" evolution of the case I made for the previous version of the Raspberry Pi B board found here: http://www.thingiverse.com/thing:209100 You can also find a similar case for the Raspberry Pi A+ board I made here: http://www.thingiverse.com/thing:566506 Raspberry Pi 3 B:http://www.thingiverse.com/thing:1427797 Enjoy. Update, added new honeycomb top upon request. Instructions This is the setup I used .35 mm j-head .25 mm layer height 125% for first layer 80% rectilinear in-fill Fan always on except for first layer 2 vertical perimiters 2 bottom layers 2 top layers This case was designed for .25 mm layer height. Print a bottom and a top part without support. Use 4x M3 20mm hex head to fasten.